News

Mirror finish aluminum coils are widely used in solar concentrators, mainly made into the aluminum frame of solar collectors. Alloys for the coil include 1050,1060 and 1070. With the improvement of aluminum frame packaging technology and the improvement of the manufacturing precision of automated equipment, the thickness of the coil can be only 0.12mm to 2.0mm thick. These coils, of …

Color coated aluminum coils for roofing sheets are of alloys 1050, 1060, 1100, 3003, 3004 and 3105. Although there are 6 candidate alloys, only 3003 and 3004 are the most popular. 1050, 1060 and 1100 are weaker in either hardness or corrosion resistance. They are suitable for roofing sheets expected to last only years, especially when they are coated with …

A color coated aluminum coil for constructions mainly refers to coil for curtain wallboard. Although coated aluminum rolls can also be applied to ceiling, gutter, roofing etc., these fall on the decoration scope of a house. The specification for those applications slightly varies from construction coated aluminum coil, which covers alloys of 1100, 3003, 3004 and 3005. The tempers are …

The 5052 color coated aluminium coil for Venetian blinds is of H19 temper, 0.16mm to 1.5mm thick, 12.5mm to 200mm wide and high gloss coating of PE or Acrylic acid for indoor applications and PE 2 coats for both sides for outdoor applications. The coil is very hard in H19 state, though its tensile strength is lower than that of …

Haomei coated aluminum letter edge strips roll is a special aluminum strip for channel letter products. The roll can be of 1050, 1060, 3003, 3105 or 5005 alloy. Tempers include H24, H26 and H34. The thicknesses are 0.5mm, 0.6mm, 0.8mm and 1.0mm, width 30mm to 500mm, and inner diameter 150mm, 400mm and 500mm. The surface can be coated, brushed, anodized, …

The aluminium strip rolls for ac machine condenser are of 8011, 1100 or 3102 alloy, with tempers of O, H22, H24, H26 and H18. The strip rolls are used for ac machine condensers because they have light weight, good heat exchange and excellent corrosion resistance. General thickness of the rolls ranges between 0.09mm and 0.20mm, and width 200mm to 1400mm. …

An aluminum rolling shutters strip is usually color coated. The colors can be customized by RAL or samples from clients. In addition to pure colors like gray, blue, black, white, green and blue, uniquely designed color coating, such as wood grain, sand grain, stone grain and so on, are available, too. Alloys and tempers for the strip supplied by Haomei …

Haomei has aluminium roll strip for wood of 1060, 1070, 1100, 3003, 3004, 3105, 5052 and 6061 alloys. Aluminium trips of different alloys vary in hardness, corrosion resistance, forming ability, welding performance, anodizing effect and other properties. To choose a suitable alloy, you need to learn about the properties of each alloy first. Generally the hardness of the alloys gets …

5754 h34 thick aluminium plate produced by Haomei Aluminum has a thickness of 5mm to 600mm. Width of the plate is up to 2600mm, and length 16000mm. The H34 stands for the manufacturing process of stabilizing an aluminium plate to 50% hardness after work hardening. Therefore, its hardness is generally the same as 5754 h14 and h24 aluminum plates, but …

Aluminum plate alloy 5754 h111 is an Al-Mg aluminium product with medium strength. The plate belongs to high-strength aluminum alloys, though it’s weaker than 5052 and 5083. The h111 temper stands for a hardness only a little stronger than O, thus the strength of 5754 h111 is far weaker than the alloy plate of other tempers. Lower hardness, however, indicates …

The 6mm 5754 aluminum checkered plate is a popular product of Haomei. Among alloys of aluminum checkered plates, 5754 stands out with medium strength, good corrosion resistance and excellent forming ability. The content of around 3% magnesium improves its hardness and anti-rust performance, and reduces its weight in a certain way. It’s weaker than 5052 in hardness and erosion resistance, …

A 5 bar 5754 aluminum checkered plate sheet is of 0.5mm to 5.0mm thick. It can be of big 5 bar aluminum checkered plate, big 5 bar mirror finish aluminum checkered plate, small 5 bar aluminum checkered plate, small 5 bar mirror finish aluminum checkered plate etc. The difference between the big 5 bar pattern and small 5 bar pattern …