Aluminium roll strip for wood

Haomei has aluminium roll strip for wood of 1060, 1070, 1100, 3003, 3004, 3105, 5052 and 6061 alloys. Aluminium trips of different alloys vary in hardness, corrosion resistance, forming ability, welding performance, anodizing effect and other properties. To choose a suitable alloy, you need to learn about the properties of each alloy first. Generally the hardness of the alloys gets stronger successively in the following order: 1070, 1060, 1100, 3003, 3004, 5052 and 6061, the corrosion resistance 1100, 1060, 1070, 3003, 3004 and 5052. The anti-rust ability of 6061 is relatively poor, but it can be strengthened by surface treatment methods like anodizing. Thus if you need both hardness and corrosion resistance, consider special surface processes. Methods with surface improvement functions include mirror polishing, color painting, anodizing, embossing etc. Those applied to wood aluminium strip rolls include color painting and anodizing. In particular, if you need the roll of a wood grain on the surface, color painting is necessary.

Surface treatment methods for aluminium roll strip for wood fall on mill finish, anodizing and color coating. If you need the natural silver color of the roll, and require little of corrosion resistance, mill finished aluminum rolls trips would be a good choice, for their prices are much lower than those with extra processes. If you need to improve the metal gloss and corrosion resistance of the rolls, you can choose anodizing, which is even more expensive than the process of color coating. If you want wood grain on the strip surface, then color coating is available. Such a process is the most cost efficiency. It provides stronger corrosion resistance, longer service life and a variety of colors and designs for the surface. Its price is higher than mill finishing yet lower than anodizing.

The aluminium roll strip for wood supplied by Haomei is 0.1mm to 2mm thick and 2mm to 1600mm wide. The weight per roll can be customized. Good prices are offered with strips of all three types of surfaces above.