Aluminium chequer plate cut to size

We supply aluminium chequer plate cut to size. Thickness ranges from 1.2mm to 8mm, among which 3mm, 4mm, 5mm and 6mm are the most frequently searched. Five bar and diamond aluminium checker plates are widely applied in vehicles, architecture, tool boxes, furniture, decoration and so on. We supply aluminium chequer plate sheet sizes including width from 100mm to 2000mm, and length 1000mm to 9000mm.

How to cut aluminium checker plate? Tips are as below.

1. Cutting tool. There’s no prescriptive tools for cutting an aluminium chequered plate. Household jigsaws are OK. Various laser cutting machines are qualified, too. Either air or nitrogen cutting can be used.

2. Which side of the plate should be up and which side down? No rules are made for this, too. Most people would place the pattern side down, but it’s also OK if you want the pattern side up. In this case you need to set the pattern height before cutting.

3. What influences the cutting effect? Type of your cutting tool, cutting power, aluminium chequer plate thickness, proficiency of the operator etc.

If you need aluminum checker plates cut to size in large quantities, just contact a supplier who will offer your desired sizes directly and spare you off the trouble of cutting. If, on the other hand, you need only to repair something at home, you might have to learn some skills about how to cut cut aluminium checker plate properly. Haomei supplies aluminium tread plates of ripple, five bar, one-rib, stucco, hammer, diamond etc. Sizes and specifications can be customized. Alloys include 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 5083 and 6061.